For this article we'll investigate the two major bear in mind before using a body hammer and dolly, you'll have to decide when service provider to use each the actual first is, dollies as with hammers come in a number of shapes, and it will depend on what kind of work that you perform the solution as far as unique shapes.
Obviously if your playing with heavier sheet metal, you'd need a heavier dolly, they just really go together, that's about all I can see you about selecting a right tool for this product, we'll get in of this later, that could be the complete article by itself.
For this article we'll discuss the two major bear in mind before using a body hammer and dolly, you'll have to decide when service provider to use each the actual first is, dollies as with hammers come in a number of shapes, and it will depend on what kind of work that you perform the solution as far as unique shapes.
Obviously if your playing with heavier sheet metal, you'd need a heavier dolly, they just really go together, that's about all I can see you about selecting a right tool for this product, we'll get in of this later, that could be the complete article by itself.
The first of the two techniques is called hammer on dolly, pretty thinkings explanatory, you put the dolly right behind the affected area but also lightly pound the metal that's on the dolly with ones flat faced body hammer, and pay close attention I mentioned lightly, if you hit hard you'll stretch the aluminium.
If you stretch the metal you'll have to use a whole new technique over it, called shrinking, a subject need to consider article also, so now that your hitting the affected area it should start to relieve the stress in the shiny and relax, metal features a memory, and this is definitely good thing, it needs to be fixed.
Give it if you plan light taps, and then run your hand over the repair area and see if possible still feel the ding, if you can't regardless of the great, your finished pores and skin repair, if you can easily still feel the dent, that you need to pound the metal all the more, I know it's mill, and repetitive, but it really works.
The next technique is known as the hammer off dolly package, and this is just like it sounds, you don't hit on the topic of the dolly, you'd aspire to the metal about ½ inch off of the dolly, make sure there are mastered the hammer on technique before trying this one, as it's a bit harder to do.
The hammer off dolly energy solutions will push the metal that's directly ahead of the body hammer, the force of the hammer is still moved to the dolly, as a result the dolly will push the metal generally direction opposite of any hammer, if the metal was flat in would forced in to some sort of "S" shape.
When making use of hammer off dolly energy solutions, you'd hit the lavish spot that sits with the low pot on the metal, using the dolly to save the low spot on the metal, to determine if your current metal is repaired all you need to do is run your hand over the metal, you can easily feel it, repeat when you have still feel the ding.
.
留言列表
