Having the right tire pressure is critical to driving performance. It is as important as having water and oil in the car, but it is often neglected because it is out of sight and out of mind. There are no flashing lights to let you know when your tire pressure is too low or too high, so it is up to you to stay on top of it.

Failure to ensure correct tire pressure can lead to:

Decreased Fuel Efficiency

This can be a killer in today's online business. Adjusting your type pressure is a free way to get your fuel go further, and it only takes ten minutes at the local gas station.

Premature Wear

Unless you've was indeed money to burn you're never going to want to buy new tires more often than you have to.


A special event, or a loss of grip do to prematurely worn tires can lead to fatal consequences.

How To check Tire Pressure

Step One

Ascertain what the correct pressure for simply because tires is. This information can be found on the side of the tyre. Tyre pressure is often expressed within an acceptable range of pressures rather than a single specific number. Filling your tires towards the lower end of this number range will give you greater grip by getting a tires a little 'softer'.

Step Two

Your tire stems will have rubber caps on them. Remove these before attempting to adjust your tire pressure.

Step Three

Set the gauge around the air compressor to a healthy number.

Step Four

Connect the nozzle to the tire. You will hear a surge of air when it initially connects. This should stop each time a seal is formed.

Step Five

Let the air compressor do its inescapable fact. When your tire is at the correct pressure, remove the nozzle swiftly.

Step Six

Screw those rubber caps back around the stem, repeat three periods, and drive safely.


創作者 Auto Repair Shop 的頭像
Auto Repair Shop

Auto Repair Shops|Auto Glass Repair|Auto Body Repair

Auto Repair Shop 發表在 痞客邦 留言(0) 人氣()